WEBK 35/630
For connection of dual cable arrangement to fit with WEB 35/630 Tee connector.
- English
- Chinese
For connection of dual cable arrangement to fit with WEB 35/630 Tee connector.
| Voltage Class | 42kV | |
| Continuous Current | 630A | 1250A* |
| AC Withstand Voltage | 117kV for 5min | |
| Partial Discharge | 45kV,≤10pC | |
|
Impulse Withstand Voltage(10 times for each polarity) |
200kV | |
| Screen Resistance | ≤5000Ω | |
Note: * refer to the condition when installed on an appropriate equipment bushing.
Features
Manufactured from EPDM rubber, providing a fully screened separable connection when mated with the bushing of interface E
100% factory tested
Design
1. External Screen
Moulded EPDM conductive rubber to ensure the connector touchable
2. Insulation
Moulded EPDM insulating rubber to ensure excellent electrical properties
3. Internal Screen
Moulded EPDM conductive rubber to control electrical stress
4. Two-headed Screw
To secure the conductor lug onto the bushing
5. Conductor Lug
To connect the cable conductor and bushing
6. Insulated Plug
Moulded epoxy plug in compliance with the bushing interface E
7. Cable Adapter
To provide initial stress relief and watertight seal
8. Earthing Wire
To earth the external screen for the connector
9. Copper Connecting Pipe
To connect the cable lugs
No. 218, Dongcheng Section, Guanzhang Road, Dongcheng District, Dongguan 523220，Guangdong Province, China 
info@flerry.cn 
+86 13549360639 
Facebook
Twitter
Linkedin
Youtube